Installation Made Easy

Experience the revolutionary Irrigreen system that's easy to install and maintain. Irrigreen is the only in-ground system that is designed with DIY in mind.

 

Not ready to take on Installation, no problem. We have a network of contractors we can connect you with.

Designed for Easy Installation

Installation So Simple That Most Customers DIY

Zero Valves. Zero Fuss.

Forget bulky valve assemblies—our heads do it all.

80% Less Digging.

Minimal trenches make minimal mess.

Smart Placement

Position heads exactly where you need them—no guesswork.

Plug‑and‑Play Wiring.

Think “snap in, power up, and go.”

Watch learn how to install Irrigreen in 90 seconds

80% less pipe

Install in a fraction of the time with 80% less digging.

Irrigreen System

Traditional System

1 head replaces up to 10 traditional heads

90% less opportunities for heads to break

Irrigreen System

Traditional System

Installation Overview

Part 1: Trench

1

Measure from the rough center of your zone to determine placement. Max spray distance is 30 feet. Mark the location of each head.

2

Locate and tap into your main waterline by shutting off the water, cutting into the mainline underground, and glueing on a tee connector.

3

Dig a 12" deep continuous trench line between each sprinkler head location and connect 1" PVC or poly pipe. Up to 8 heads can fit on one line.

Step 2: Irrigreen Smart Controller

1

Find a location that is close to an outlet, has strong WiFi, and a mounting surface - inside or outside.

2

Use included mount and hardware to secure your controller to your wall.

3

Connect controller to the internet by following the simple in app guide.

4

Attach Irrigreen plug-and-play cables per instructions. You can attach up to 16 Irrigreen heads, and also, up to 8 traditional valve zones (e.g. drip zones) to the Irrigreen controller.

Part 3: Irrigreen Heads

1

Flush the water line and connect the Irrigreen heads to the main line pipe with the included 12" flexible pipe.

2

Position the sprinkler caps to be 1/2" above the grade. We reccomend you fully bury a small valve box (not visible) next to each head to protect cable connections.

3

Starting at the controller, daisy-chain sprinkler heads together with included plug-and-play wiring.

Step 4: Program in App

1

Follow our step-by-step instructions to assign each head to a zone.

2

Calibrate your heads so the system learns about your water pressure.

3

Drag-and-drop points on the app to program your desired zone shape.

4

Set your watering schedules or turn on auto-water and let us determine the optimal amount of water for your lawn.

For more detailed instructions on how to install an Irrigreen system, please visit support.irrigreen.com

FAQs

What are the system requirements?

  1. Irrigation Requirements
    • Constant Pressure (40-80 PSI)
    • Good Flow (8+ GPM)
    • Clean Water
    • 1" PVC Piping
  2. Head Spacing Requirements for uniform water distribution
    • No greater than 30' from edge of lawn
    • No greater than 60' between sprinkler heads
  3. Strong Internet Connectivity via Wi-Fi
  4. Proper Power (110-210v AC)
  5. On a well?
    • Constant pressure pump or cycle stop valve with a small tank
    • Clean water - 100 mesh/150 micron filter

 

Can I install the whole system myself?

As with any irrigation system, we reccomend having a licensed professional install a backflow preventor if you do not have one already. Many counties require this.

Can I retrofit my existing system?

While we do have happy customers that have leveraged exisiting pipes for their Irrigreen System, most find it easier and safer to just trench new lines and install new pipes. That way you can get the center head placement we reccomend, and have the correct water pressure in your pipes.

 

Can I just replace my exisiting heads?

No, Irrigreen is a complete system that requires an Irrigreen controller and Irrigreen cables to drive the precision functionality of the heads.

Can I hook it up to a hose?

No, Irrigreen must be connected to a main waterline by PVC or poly pipe.

What about my drip or other non Irrigreen zones?

The Irrigreen controller has inputs for up to 8 additional zones run off traditional valves. You will be able to leverage our auto-water feature, which optimizes for local weather or run timed schedules on those zones from your app.

Check out some follow DIYers installing Irrigreen

The Lawn Whisperer

Lawncology

BYOT

The Lawngest Yard

Step by Step Guide

Step 1

Text

Step 2

Text

Step 3

Text

Step 4

Text

Step 5

Text

Step 6

Text

"I fell immediately in love with the idea, but most surprised how easy the installation and setup was. They were quick to respond when I needed clarification during its installation. My lawn is greener then it ever has been and I’m using less water than ever. Price was more expensive then I was hoping, but with the money I’m saving in water cost and plus the money I will save in installation cost when expanding my yard, it will end up paying for itself."

Brandon S.

"Installed my Irrigreen system about 1.5 months ago. By far the best decision I got for my lawn care. It works as it is advertised and my 3000sqft front and backyard grass is healthier than ever with only 3 Irrigreen sprinkler heads. Highly highly recommended."

Saman N.

"System delivered quickly and complete. I had forgotten a to add some additional cables to my initial order - but their support team was able to get them shipped out to me quickly. Did the installation of 7 sprinkler heads myself, which was nearly as easy as described in marketing materials and YouTube videos. All in all the product is great, I’d recommend to anyone looking at installing a new irrigation system."

Kyle G.