Smart irrigation, mapped to your yard
Smart Sprinkler Heads, the Smart Controller, and the Irrigreen App. Weather aware automation for even coverage, less waste, and a healthier lawn.
The system.
Irrigreen is a fully integrated system. Smart heads deliver precision watering with built in intelligence. The Smart Controller runs every zone and tells each head exactly where to water. The Irrigreen app puts control in your pocket.
Smart Sprinkler Heads.
Precision watering that adapts in real time for even coverage with built in intelligence.
Smart Controller.
Coordinates every zone and runs schedules intelligently.
Irrigreen App.
Customize mapping, scheduling, and weather aware automation from anywhere.
Precision rain like coverage
Smart sprinkler heads.
Irrigreen smart sprinkler heads combine digitally controlled watering with precision mechanics to deliver even coverage, reduce runoff, and follow the exact boundary you set.
Built-in tech.
Each head includes a next gen processor, pressure sensors, Bluetooth, and built in self diagnostics
360° rotation.
Arc360™ spray technology delivers up to 2,800 sq ft of coverage per smart head
16 streams.
RainSim™ delivers 16 rotating streams for even, rain like coverage and improved absorption
Self-Cleaning.
SmartRinse™ automatically clears sediment before every run to help prevent clogs
Built for real yards
YardTough™ design.
Made to handle seasons, daily wear, and lawn care. Strong materials, smart details, and a design that stays clean and reliable over time.
- Built with high performance materials designed to stand up to sun, heat, cold, and years of outdoor exposure
- Retracts cleanly to stay low profile and lawn friendly
- Stays cleaner with SmartRinse which helps flush debris to reduce sticking and support reliable retraction
Fewer parts for greater reliability so there are fewer failure points over time
Arc360™ spray technology with RainSim™ delivers 16 rotating streams for even, rain like coverage and less runoff.
- 360° rotation
- 16 streams of varying distance simulate natural rainfall for better absorption
- More even distribution to help reduce pooling and dry spots
- Designed to keep water on the lawn, not the driveway
Two internal motors control throw distance and rotation speed in real time, so watering stays inside your boundary and precipitation stays consistent.
- A ball valve adjusts throw distance as the head rotates
- Short throws spin faster so precipitation stays consistent
- Long throws slow down to keep coverage even across the zone
Built in sensors support self diagnostics and can send app notifications if an issue is detected.
- Sensor based monitoring helps detect errors early
- App alerts can flag issues like rotor errors and leaks
- Faster troubleshooting with fewer surprises
SmartRinse automatically clears sediment before every run to help prevent clogs and keep performance consistent.
- Flushes debris before watering starts
- Helpful in sandy soil and variable conditions
- Supports reliability with less maintenance
YardTough design is made to handle seasons, daily wear, and the realities of lawn care.
- Designed for all climates, including freeze thaw conditions
- Retracts cleanly when not in use
- Built to handle lawn maintenance like mowing and foot traffic
Since each head can spray up to 30 ft and rotate 360° that means each head can cover up to 2,800 sq ft per head. In many yards, one Irrigreen head can replace 6 to 10 traditional heads.
- Fewer heads means fewer points of failure
- Cleaner layouts with less lawn clutter
- Simpler installs and maintenance over time
The brain behind every zone
Smart Controller.
The Smart Controller connects to Wi Fi and runs every zone with precision. It translates your map into real time commands, telling each head exactly how far to spray at every point in its rotation so water stays inside your boundary.
Head by head precision.
Controls every smart head individually as it rotates, adjusting distance in real time so watering follows the exact shape you mapped.
Zones run as one system.
Coordinates start, stop, and timing across the yard so zones water predictably and consistently, not as independent heads guessing.
Keeps watering without Wi Fi.
Stores your latest schedule on the controller, so watering continues during outages and reconnects automatically when Wi Fi returns.
Control you can see.
Irrigreen Smart Controller 3 is Irrigreen’s most advanced controller yet, now with a built in screen right on the box. So you can check status and access key functions even when your phone is inside, or when a landscaper needs quick access on site.
- Connects to Wi Fi and runs your yard as one system
- Translates your mapped zones into precise head by head control
- Supports up to 16 Irrigreen heads plus 8 traditional valve zones
- Works with common add ons like a master valve and sensors
It translates the zone boundary from the app into commands for each head, adjusting throw distance through rotation so watering stays inside the mapped shape.
Instead of setting one fixed radius, the controller can tell a head to change distance at different points in its rotation to match corners, edges, and exclusions.
The controller coordinates zone runs so watering starts, stops, and behaves consistently across the system.
Your latest schedule is stored locally, so watering continues on schedule if Wi Fi drops. When Wi Fi returns, the system reconnects automatically.
Control in your pocket
Map zones, build schedules, enable weather aware automation, and manage everything from anywhere.
Map your zones.
Draw boundaries so water stays on grass, not concrete
Schedule by zone.
Set watering times that match each area of your yard
Weather aware automation.
Let schedules adjust automatically as conditions change with AutoWater
Control and notifications.
Manage remotely and get alerts if the system detects an issue
Control from anywhere.
Not every part of your lawn needs the same watering. The app helps you dial in detail where it matters, without making watering complicated.
- Handle tricky areas like corners, narrow side yards, and curved edges with cleaner boundaries
- Protect the places you do not want watered like patios, driveways, mulch beds, and fence lines
- Fine tune for sun and shade so dry spots and soggy spots are easier to avoid
- Make quick changes without starting over when you reseed, add landscaping, or adjust zones
- Stay consistent through the season with small adjustments that add up to healthier turf
You map each zone by placing points along the perimeter you want to water as the head rotates 360°. As you add points, you calibrate throw distance by dialing it up or down until it hits the boundary. The system then uses those mapped points to keep watering inside the line throughout the rotation.
Add exclusion points to mark “do not water” areas inside a zone, like patios, driveways, mulch beds, fence lines, or landscaping.
Set schedules by zone, then adjust anytime without redoing your setup.
With AutoWater enabled watering can adjust automatically to help reduce unnecessary runs depending on the weather.
Run, pause, or adjust zones from anywhere in the app.
Get alerts if the controller is offline, schedules start, stop, or skip, and any major errors or leaks.
Install with confidence
Getting Irrigreen installed is simple. Installation is separate, but our certified installer map helps you find a Pro near you in minutes. Don't see one nearby? We’ll help find and onboard a Pro in your area.
Find a certified installer.
Enter your zip code on our installer map to see certified pros near you.
Don't see one nearby?
Our team will help search for installers in your area and work to onboard new Pros through our certification process.
Want help choosing?
Designing with a sales rep? We can recommend installers during your call.
Lawn friendly
80% Less trenching & pipe. Less disruption.
Irrigreen uses significantly fewer heads and less pipe than traditional systems, which can mean faster installs and a lawn that bounces back quicker with less mess.
- Fewer heads means fewer holes and fewer connections
- Less pipe means less trenching through your lawn
- A simpler layout can mean fewer points to maintain over time
Smart by design.
Built for real life. It keeps watering predictable, and keeps running even if your internet goes out.
Bluetooth in every head.
Each smart sprinkler head includes built in Bluetooth for direct connectivity.
Works even when WiFi is out.
Your latest schedule is saved to the Smart Controller, so watering continues even if your internet goes down.
Self monitoring, with alerts.
Built in sensors support self diagnostics and can send app notifications if the system detects an issue.
Compare
Irrigreen vs Traditional.
In-ground irrigation comparison
Heads per zone
Maintenance
Installation
Watering pattern
Zone shape control
Coverage
Edges and overspray
Precision
Clogs and debris
Scheduling
System visibility
Cost over time
The difference is clear.
Same yard, but one is smarter, simpler, and uses up to 50% less water
Irrigreen.
- 80% less pipe
- 70% less sprinkler heads
- Less maintenance, less failure points
- Up to 50% less water with no overlapping spray or overspray
- Precision control of where the water goes
- Lower water bill so you save money over time
- Easier automation with smart weather aware scheduling
Traditional.
- 80% more pipe
- 70% more sprinkler heads
- More maintenance, more failure points
- Up to 50% more water usage with overlapping spray and overspray
- Less control of where the water goes
- Higher water bill, which makes it more expensive over time
- Basic scheduling
Product specifications.
40 to 80 PSI operating range. (Optimal: 60 PSI)
8 GPM (at 60 PSI & 8 GPM, throws 30 ft)
Adjustable: 5 ft to 30 ft
Up to 2,800 sq ft (fewer heads, fewer trenches)
Spray-to-spray (not head-to-head) — no overlap
1" mainline, single trench, single digital wire
Controls digital heads + traditional valves — easy retrofits
Works with city, well, reclaimed, and pumped water
SmartRinse self-cleaning riser for all soil types
YardTrace™
Quote + design in minutes
Start with your address or a plot map, and YardTrace will trace the yard, places Irrigreen smart sprinkler heads in optimal locations, and recommends the right system size.
FAQ
Do you offer financing?
Yes. You can use Affirm on your order.
What happens if Wi Fi goes down?
Your system should keep watering based on the last saved schedule, but you may lose app control and remote access until Wi Fi returns.
Can Irrigreen be used on slopes?
Yes. For best results, watering plans typically use shorter runtimes with cycle and soak to reduce runoff, adjusted for soil type and grade.
Can I connect Irrigreen to an existing irrigation mainline?
Yes* - you can, but the existing pipe may not always line up how you'd like.
Can you splice the wire/cable?
NO.They carry power and data and are extremely sensitive to modification. If you splice the wire the smart sprinkler head will not function and you will need to replace the wire.
Can I tie Irrigreen into an existing controller or timer?
No. Irrigreen smart heads require an Irrigreen controller because they use proprietary digital control, not a standard controller output.
Can multiple zones run at the same time?
It depends on your water supply. Most systems run zones one at a time to maintain consistent pressure and accuracy. If your supply has enough flow and pressure, some configurations may support more than one zone, but it is not always recommended.
Can professionals access or manage systems remotely?
Yes, typically through app based access and shared permissions.
What warranty and professional support does Irrigreen provide?
Irrigreen typically includes a 2 year standard warranty on heads, controller, cables, and Irrigreen parts. An extended warranty can be purchased as well.